Internal Issue Addressing Videos (CNCTools.co.za)

Basically two steps
1. use a filter to convert the image to sketch mode,
2. load in RDWorks

Next, let’s talk about this Reda board. It is a method of engraving photos. Or, first of all, you open the Meitu Xiuxiu and open the software. Do you want to upgrade it? Just close it and it can be opened to find it. Find the picture you want to engrave, such as this one. The higher the pixels of the photo, the better the engraving effect will be. The art selected here has a sketch here, so convert it into a sketch. You can increase the sharpness, and I don’t say higher is better. I want to increase the contrast. You can adjust this aspect, and it will be all white.

If you adjust all aspects, it feels like you will save it directly to the desktop after the adjustment. If the save is successful, you will be done with it, close it, and then open the engraving software. Open the engraving software, and then click file. There is an import here to import this picture. This picture after we process it, import it and open it here. First, you need to set the material and size you want to engrave on. Then you set 100. That’s not okay. It’s wrong. Take a step back, then select it first and second and lock the lock. It will be enlarged and reduced proportionally. It will not be good if the picture is deformed.

After the image size is adjusted, select the image and add this bitmap for bitmap processing. There is something here to modify the numerical resolution. Generally, raise it a little higher and adjust it to one thousand and five. For the frequency of the dot image selected here, it is usually enough to adjust it to seventy-five. Just click on the original image of the application. If there is no swimming original image, click OK. If you enlarge it, you will see that it is a small dot. It is composed of small dots one by one.

After doing this, you should trace what the default setting is here. This is 0.1. Generally, just adjust it to 0.07. In terms of horizontal power, it should be about ten or ten which is enough for carving on a wooden board. The speed is 240 or 22, which is normal 242. It is based on your material. If your material is dark or white, you can carve it normally.

If it is a dark color, use black, or it is transparent. You can choose reflective engraving, which means that the reflection effects are normal. If you engrave on a white board, you can engrave normally. If you engrave on transparent acrylic, Just select this reflection output, and its black part will not fall off. Squeeze out this white part, those materials that we say are particularly black, and then say that its hair is black, will it not engrave reflective output?

Well, it knows that the white part and the light-colored part of this may be relatively more effective. Uh, these two methods are different from your materials. You can adjust its method, or you can engrave and output directly.

Similiar process: youtube.com/watch?v=3_3598KA-rY

Machines, Consumables and Parts Available from buythis.co.za/

For more info on Advanced Machinery visit am.co.za/

Chat with us by sending “hi” on Whatsapp to 060 600 6000.

Advanced Machinery,Machines,South Africa,AM.CO.ZA,Prepare Image,Engrave Stone,RDWorks